LowbedGoldhofer
4-Achs-Tele-Semi mit hydr. Doppelklapprampen
Lowbed
Goldhofer
4-Achs-Tele-Semi mit hydr. Doppelklapprampen
Vaste prijs excl. btw
€ 104.800
(€ 124.712 bruto)
Bouwjaar
2025
Toestand
Gebruikt
Locatie
Dortmund 

Prijs & locatie
Vaste prijs excl. btw
€ 104.800
(€ 124.712 bruto)
- Verhuur:
- is mogelijk
- Locatie:
- Martener Hellweg 100, 44379 Dortmund, Deutschland

Bellen
Technische details
Afmetingen en gewicht
Totaalgewicht:
54.500 kg
Leeggewicht:
10.900 kg
Maximaal laadgewicht:
43.600 kg
Laadruimte lengte:
8.700 mm
Laadruimtebreedte:
2.550 mm
Laadruimtehoogte:
855 mm
Bedrijfsklaar gewicht:
10.900 kg
Assen en wielen
Asconfiguratie:
> 3 assen
Bandenmaten:
245/70 r17.5
Veiligheidsvoorzieningen
ABS
Verdere details
Eerste registratie:
04/2025
Kleur:
grijs
Details over het aanbod
- Advertentie-ID:
- A806-88-92
- Referentienummer:
- 931
- Laatste aanpassing:
- voor het laatst op 02.09.2026
Omschrijving
Gooseneck, rigid, in center tube design:
-Closed outer frame with cutouts for lashing straps (LC 1,500 daN)
-Steel floor with anti-slip surface
-Including rail for aluminum ramps
-2" – Kingpin
-Mechanically operated BPW landing gear
-550 mm long, 8’ bevel at the end of the gooseneck
-Front bulkhead incl. parking position for rear wall, 400 mm high
-Spare wheel holder mounted vertically on the front of the gooseneck
-3 pairs of lashing rings LC 5,000 daN recessed in the loading platform of the gooseneck
-Aluminum stake sides 400 mm high, consisting of 2 x side boards length 3,150 mm and rear board with rails (galvanized)
-Storage box rectangular, aluminum, hinged lid, lockable, dimensions approx. 400 x 800 mm, center
-Storage box 45’, aluminum, hinged lid, lockable, dimensions approx. 400 x 800 mm, left
-Storage box 45’, aluminum, hinged lid, lockable, dimensions approx. 400 x 800 mm, right
Loading platform, single telescoping:
-Closed outer frame with cutouts for lashing straps (LC 1,500 daN)
-Fixed section at the front 700 mm
-Sheet metal floor with anti-slip surface
-Beveled interface between fixed section and loading platform for attaching bridge planks and wheel recesses
-Excavator recess incl. elongated holes for securing the load (LC 1,500 daN), length approx. 3,850 mm
-Preparation for hydraulic ramp (electrical supply)
-Supports for widening to 3,000 mm
-Beveled vehicle rear 8°, 550 mm long
-Sled design for easy installation and removal of ramps
-Continuous mudflap at the rear
-1 pair of lashing points LC 10,000 daN in the center of the loading platform behind the gooseneck
-7 pairs of lashing points LC 10,000 daN in the outer frame of the loading platform
-6 pairs of rail pockets 100 x 50 mm in the outer frame of the loading platform
-1 pair of lashing points LC 10,000 daN in the center in the rear area of the loading platform
-1 pair of rail pocket strips approx. in the center of the loading platform
-1 pair of rail pocket strips on the fixed section
-1 pair of rail pocket strips behind the last axle
Ramps:
-Hydraulic double folding ramps, 2,750+1,500x800 mm
-Wood deck larch
-Control via remote control (possible via cable and radio)
-Ramps with quick-change (dismantling system)
Chassis:
-Axle manufacturer BPW ECO Max
-2 ride heights
-4 axles á 10 t (technically 12 t)
-Twin tires 245/70 R17.5
-2 x fixed axle and 2 x friction-steered axle
-Reverse steering lock of the friction-steered axle via reverse gear
-Brake system manufacturer Knorr (according to EU regulations with EBS-E)
-TIM G2 from Knorr (Trailer Information Module)
-Vehicle stability control RSS (Roll Stability Support)
Cedpfx Aqei Ai E Reqeri
-Load-dependent lift axle on the first axle incl. starting aid (forced lowering of the lift axle via TIM possible)
Accessories:
-4 chocks with holder
-2 pairs of warning signs 423 mm x 423 mm, with 2 position lights and socket for rotating beacon, steplessly adjustable up to 3,950 mm
-Mounting options on the gooseneck and on the loading platform (alternatively on the ramp, if available) are included
-Plug-in partition sheet at the end of the excavator recess
-Electro-hydraulic unit for ramp operation
-Ramp operation via wireless remote control
-Hydraulic support legs at the rear of the vehicle for support during the loading process
-1 pair of additional reversing lights rear, switched on in reverse gear
-Wood widening planks - larch (option)
De advertentie werd automatisch vertaald. Vertaalfouten zijn mogelijk.
-Closed outer frame with cutouts for lashing straps (LC 1,500 daN)
-Steel floor with anti-slip surface
-Including rail for aluminum ramps
-2" – Kingpin
-Mechanically operated BPW landing gear
-550 mm long, 8’ bevel at the end of the gooseneck
-Front bulkhead incl. parking position for rear wall, 400 mm high
-Spare wheel holder mounted vertically on the front of the gooseneck
-3 pairs of lashing rings LC 5,000 daN recessed in the loading platform of the gooseneck
-Aluminum stake sides 400 mm high, consisting of 2 x side boards length 3,150 mm and rear board with rails (galvanized)
-Storage box rectangular, aluminum, hinged lid, lockable, dimensions approx. 400 x 800 mm, center
-Storage box 45’, aluminum, hinged lid, lockable, dimensions approx. 400 x 800 mm, left
-Storage box 45’, aluminum, hinged lid, lockable, dimensions approx. 400 x 800 mm, right
Loading platform, single telescoping:
-Closed outer frame with cutouts for lashing straps (LC 1,500 daN)
-Fixed section at the front 700 mm
-Sheet metal floor with anti-slip surface
-Beveled interface between fixed section and loading platform for attaching bridge planks and wheel recesses
-Excavator recess incl. elongated holes for securing the load (LC 1,500 daN), length approx. 3,850 mm
-Preparation for hydraulic ramp (electrical supply)
-Supports for widening to 3,000 mm
-Beveled vehicle rear 8°, 550 mm long
-Sled design for easy installation and removal of ramps
-Continuous mudflap at the rear
-1 pair of lashing points LC 10,000 daN in the center of the loading platform behind the gooseneck
-7 pairs of lashing points LC 10,000 daN in the outer frame of the loading platform
-6 pairs of rail pockets 100 x 50 mm in the outer frame of the loading platform
-1 pair of lashing points LC 10,000 daN in the center in the rear area of the loading platform
-1 pair of rail pocket strips approx. in the center of the loading platform
-1 pair of rail pocket strips on the fixed section
-1 pair of rail pocket strips behind the last axle
Ramps:
-Hydraulic double folding ramps, 2,750+1,500x800 mm
-Wood deck larch
-Control via remote control (possible via cable and radio)
-Ramps with quick-change (dismantling system)
Chassis:
-Axle manufacturer BPW ECO Max
-2 ride heights
-4 axles á 10 t (technically 12 t)
-Twin tires 245/70 R17.5
-2 x fixed axle and 2 x friction-steered axle
-Reverse steering lock of the friction-steered axle via reverse gear
-Brake system manufacturer Knorr (according to EU regulations with EBS-E)
-TIM G2 from Knorr (Trailer Information Module)
-Vehicle stability control RSS (Roll Stability Support)
Cedpfx Aqei Ai E Reqeri
-Load-dependent lift axle on the first axle incl. starting aid (forced lowering of the lift axle via TIM possible)
Accessories:
-4 chocks with holder
-2 pairs of warning signs 423 mm x 423 mm, with 2 position lights and socket for rotating beacon, steplessly adjustable up to 3,950 mm
-Mounting options on the gooseneck and on the loading platform (alternatively on the ramp, if available) are included
-Plug-in partition sheet at the end of the excavator recess
-Electro-hydraulic unit for ramp operation
-Ramp operation via wireless remote control
-Hydraulic support legs at the rear of the vehicle for support during the loading process
-1 pair of additional reversing lights rear, switched on in reverse gear
-Wood widening planks - larch (option)
De advertentie werd automatisch vertaald. Vertaalfouten zijn mogelijk.
Aanbieder
Opmerking: Registreer gratis of log in, om alle informatie te bekijken.
Geregistreerd sinds: 2007
62 advertenties online
Aanvraag sturen
Telefoon & Fax
+49 231 9... weergeven
Misschien bent u ook geïnteresseerd in deze advertenties.
Geslaagd:
Uw bericht is verzonden.
Advertentie
Bischofshofen
775 km
Minigraafmachine
KUBOTAKX-41--1,5t
KUBOTAKX-41--1,5t
Geslaagd:
Uw bericht is verzonden.
Advertentie
Petershagen
248 km
Dieplader oplegger
Gabelstapler/Arbeitsbühnentransporter Klapprampe
Gabelstapler/Arbeitsbühnentransporter Klapprampe
Geslaagd:
Uw bericht is verzonden.
Advertentie
Andelst
38 km
Volvo FH 500 6X4 TREKKER/TRACTOR/SZM EURO 6 HYDRAULIEK
VolvoFH 500 6X4 TREKKER/TRACTOR/SZM EURO 6 HYDRAULIC
VolvoFH 500 6X4 TREKKER/TRACTOR/SZM EURO 6 HYDRAULIC
Geslaagd:
Uw bericht is verzonden.
Advertentie
Parma
893 km
Dieplader oplegger voor het transport van bouwmachines
Meusburgercarrellone centinato buche 4assi usato
Meusburgercarrellone centinato buche 4assi usato
Geslaagd:
Uw bericht is verzonden.
Advertentie
Wuppertal
164 km
Bestelwagen
MERCEDES-BENZ280 SE 3.5 Limousine W108
MERCEDES-BENZ280 SE 3.5 Limousine W108
Geslaagd:
Uw bericht is verzonden.
Advertentie
Dortmund
160 km
Dieplader
MAX Trailer3-Achs-Tele-Semi mit hydr. Rampen-nlla.
MAX Trailer3-Achs-Tele-Semi mit hydr. Rampen-nlla.
Geslaagd:
Uw bericht is verzonden.
Advertentie
Scherpenzeel
14 km
Scania P420 Luxury – lijn met uitschuifbare en uitklapbare elementen. id 69
ScaniaP420 Luxury-line met pop-up en pop-out. id 69
ScaniaP420 Luxury-line met pop-up en pop-out. id 69
Geslaagd:
Uw bericht is verzonden.
Advertentie
Dortmund
160 km
Open oplegger met zeil
MAX Trailer4-Achs-Jumbo-Semi mit Planenaufbau
MAX Trailer4-Achs-Jumbo-Semi mit Planenaufbau
Geslaagd:
Uw bericht is verzonden.
Advertentie
Bendorf
247 km
Paardentransport vrachtwagen
DAF SteinsbergerX 16.290
DAF SteinsbergerX 16.290
Geslaagd:
Uw bericht is verzonden.
Advertentie
Raalte
74 km
Goldhofer STZ-L6-65/80A
GoldhoferSTZ-L6-65/80A
GoldhoferSTZ-L6-65/80A
Uw advertentie is succesvol verwijderd
Er is een fout opgetreden




















































































































































































































