Open semitrailer with tarpSCHMITZ CARGOBULL
SCS 24/L LENK, LIFT, STAPLERHALTERUNG
Open semitrailer with tarp
SCHMITZ CARGOBULL
SCS 24/L LENK, LIFT, STAPLERHALTERUNG
Vaste prijs excl. btw
€ 11.900
(€ 14.161 bruto)
Bouwjaar
2018
Toestand
Gebruikt
Locatie
Greven 

Basisgegevens
Prijs & locatie
Vaste prijs excl. btw
€ 11.900
(€ 14.161 bruto)
- Locatie van verkoper:
- Mergenthaler Str. 2, 48268 Greven, Duitsland

Bellen
Technische details
Afmetingen en gewicht
Totaalgewicht:
36.000 kg
Maximaal laadgewicht:
28.812 kg
Laadruimte lengte:
13.620 mm
Laadruimtebreedte:
2.480 mm
Laadruimtehoogte:
2.700 mm
Assen en wielen
Asconfiguratie:
3 assen
Veiligheidsvoorzieningen
ABS
Verdere details
Eerste registratie:
11/2018
Details over het aanbod
- Advertentie-ID:
- A233-08-503
- Referentienummer:
- 8230
- Laatste aanpassing:
- voor het laatst op 10.11.2026
Omschrijving
3-axle curtainsider with steered axle, lift axle, Code-XL body, beverage and Daimler-9.5 certificate, sliding roof, and complete preparation for a forklift. Chassis hot-dip galvanized.
DIMENSIONS AND WEIGHTS
Dodpfx Ao Aimh Def Rowd
- Internal body length 13,620 mm, body width 2,480 mm
- Front body height 2,700 mm / rear body height 2,750 mm
- Lateral passage height front 2,550 mm / rear 2,600 mm
- Front wall height 2,400 mm
- Overall height 4,015 mm, loading height at the rear 1,235 mm (unladen)
- Fifth wheel height 1,150 mm (unladen), wheelbase 7,700 mm
- Rear door opening 2,480 x 2,648 mm (W x H)
- Permissible total weight 36,000 kg (technical 39,000 kg)
- Payload 28,812 kg (technical 31,812 kg)
- Permissible aggregate load 24,000 kg, fifth wheel load 12,000 kg
- Tare weight, complete 7,188 kg
CHASSIS / AXLES / BRAKES
- Chassis MODULOS, bolted, hot-dip galvanized, 10-year warranty against rust-through
- 3 x Schmitz ROTOS SCB 9 t axles, disc brake 430 mm, offset 120
- 3rd axle as trailing steered axle, locking when reverse gear is engaged
- 1st axle liftable (driving assistance, activation via 3x brake)
- Axle spacing offset 1,310 / 2,020 mm
- SCB air suspension, lifting and lowering device with auto-reset
- EBS 4S/2M+1M with stability program (RSP)
- Two-line compressed air brake system, double-diaphragm spring brake cylinder
- Trailer-Info-System Smartboard with axle load display and mileage
- Support legs JOST, semi-round foot with plate, single-sided operation, low maintenance
- Kingpin 2" interchangeable
- Lateral impact protection, foldable underrun protection (forklift holder)
- Plastic mudguards, additional mudguards between the axles, anti-splash mud flaps
- 2 wheel chocks with holder
FORKLIFT PREPARATION
- Chassis adaptation for forklift
- Holder with foldable underrun protection
- Steel impact protection at the rear with roller neck impact buffers and chain holder
- 3 sockets at the rear (2x 7-pole, 1x 15-pole) for forklift
WHEELS AND TIRES
- 6 x 385/65 R22.5 Goodyear, regional transport (M+S)
- Steel wheels 11.75x22.5 offset 120, silver RAL 9006, protective caps for wheel nuts
- Without spare wheel holder
LIGHTING
- LED lighting system 24 V according to ECE R48, multi-chamber lights
- LED side marker lights with flashing function
- LED position lights
- LED ambient lighting on the right and left in the area of the support legs
- Premium distributor with 3 sockets (2x 7-pole, 1x 15-pole)
- Rear contour marking red, side white
BODY
- Platform body 3-section
- Front wall anodized with steel corner posts (galvanized) and steel impact protection inside 350 mm
- Document box, plastic, on the front wall
- Rear wall: aluminum double-wing doors in body height with internal twist-lock closures
- 2 steel corner posts at the rear with integrated lashing system
- 3 pairs of center rails, each with 4 lashing slots, reinforced
- 4 rows of aluminum top rail with V-profile
- Open holder for 16 top rails on the left
- Outer frame with lashing rail and 3 pairs of rail wedges
- Retractable ladder at the rear
- Plastic tool box with lid holder, insert tray and drawer
FLOOR
- 28 mm plate floor, max. 7,500 kg forklift axle load (strength test according to DIN EN 283)
- Floor completely glued, sealed around and between the floor joints
ROOF AND TARPAULIN
- Schmitz sliding roof, 180 mm height, 2,480 mm internal width, end rail foldable
- Sliding roof can also be shifted to the rear
- Sliding roof with manual rail lifter
- Sliding tarpaulins 880 g/m² with reinforce
De advertentie werd automatisch vertaald. Vertaalfouten zijn mogelijk.
DIMENSIONS AND WEIGHTS
Dodpfx Ao Aimh Def Rowd
- Internal body length 13,620 mm, body width 2,480 mm
- Front body height 2,700 mm / rear body height 2,750 mm
- Lateral passage height front 2,550 mm / rear 2,600 mm
- Front wall height 2,400 mm
- Overall height 4,015 mm, loading height at the rear 1,235 mm (unladen)
- Fifth wheel height 1,150 mm (unladen), wheelbase 7,700 mm
- Rear door opening 2,480 x 2,648 mm (W x H)
- Permissible total weight 36,000 kg (technical 39,000 kg)
- Payload 28,812 kg (technical 31,812 kg)
- Permissible aggregate load 24,000 kg, fifth wheel load 12,000 kg
- Tare weight, complete 7,188 kg
CHASSIS / AXLES / BRAKES
- Chassis MODULOS, bolted, hot-dip galvanized, 10-year warranty against rust-through
- 3 x Schmitz ROTOS SCB 9 t axles, disc brake 430 mm, offset 120
- 3rd axle as trailing steered axle, locking when reverse gear is engaged
- 1st axle liftable (driving assistance, activation via 3x brake)
- Axle spacing offset 1,310 / 2,020 mm
- SCB air suspension, lifting and lowering device with auto-reset
- EBS 4S/2M+1M with stability program (RSP)
- Two-line compressed air brake system, double-diaphragm spring brake cylinder
- Trailer-Info-System Smartboard with axle load display and mileage
- Support legs JOST, semi-round foot with plate, single-sided operation, low maintenance
- Kingpin 2" interchangeable
- Lateral impact protection, foldable underrun protection (forklift holder)
- Plastic mudguards, additional mudguards between the axles, anti-splash mud flaps
- 2 wheel chocks with holder
FORKLIFT PREPARATION
- Chassis adaptation for forklift
- Holder with foldable underrun protection
- Steel impact protection at the rear with roller neck impact buffers and chain holder
- 3 sockets at the rear (2x 7-pole, 1x 15-pole) for forklift
WHEELS AND TIRES
- 6 x 385/65 R22.5 Goodyear, regional transport (M+S)
- Steel wheels 11.75x22.5 offset 120, silver RAL 9006, protective caps for wheel nuts
- Without spare wheel holder
LIGHTING
- LED lighting system 24 V according to ECE R48, multi-chamber lights
- LED side marker lights with flashing function
- LED position lights
- LED ambient lighting on the right and left in the area of the support legs
- Premium distributor with 3 sockets (2x 7-pole, 1x 15-pole)
- Rear contour marking red, side white
BODY
- Platform body 3-section
- Front wall anodized with steel corner posts (galvanized) and steel impact protection inside 350 mm
- Document box, plastic, on the front wall
- Rear wall: aluminum double-wing doors in body height with internal twist-lock closures
- 2 steel corner posts at the rear with integrated lashing system
- 3 pairs of center rails, each with 4 lashing slots, reinforced
- 4 rows of aluminum top rail with V-profile
- Open holder for 16 top rails on the left
- Outer frame with lashing rail and 3 pairs of rail wedges
- Retractable ladder at the rear
- Plastic tool box with lid holder, insert tray and drawer
FLOOR
- 28 mm plate floor, max. 7,500 kg forklift axle load (strength test according to DIN EN 283)
- Floor completely glued, sealed around and between the floor joints
ROOF AND TARPAULIN
- Schmitz sliding roof, 180 mm height, 2,480 mm internal width, end rail foldable
- Sliding roof can also be shifted to the rear
- Sliding roof with manual rail lifter
- Sliding tarpaulins 880 g/m² with reinforce
De advertentie werd automatisch vertaald. Vertaalfouten zijn mogelijk.
Aanbieder
Opmerking: Registreer gratis of log in, om alle informatie te bekijken.
Laatst online: Gisteren
Geregistreerd sinds: 2015
28 advertenties online
Aanvraag sturen
Telefoon & Fax
+49 2571 ... weergeven
Uw advertentie is succesvol verwijderd
Er is een fout opgetreden


