Hooitechnologie

Metal-Fach Ballenwickler Z 529 selbstladend hydr

Metal tray
Bale wrapper
Z529
self-loading
Length: 2220mm
width: 1420mm
height: 2650mm
Own weight: 780kg
Tractor hitch: three-point hitch
Machine drive: hydraulic
Tractor power: 60KW
Empfolene delivery capacity of the tractor pump: 26l/min
Empfolener hydraulic pressure: 14 MPa
Bale size 1200mm - 1500mm
Film width: 750mm

Standard equipment:
3-point hitch
Film cutter
Film pre-stretcher 750mm
Hnolhcjhlr Sxsdw Ijp
Manual control panel
Semi-automatic or fully automatic wrapping process


The Z529 bale wrapper is a machine that is suspended from the front or rear three-point linkage of the tractor. It is loaded from below by means of special arms equipped with rotating rollers. The wrapping process is automatic thanks to the arm rotating around the bale with an attached film feeder, which coats the bale rotating on the rollers with film. Once the wrapping process is complete, the film is caught and cut by a hydraulically controlled cutter. After confirmation with a push button, the wrapped bale is unloaded to the ground by opening the arms with rollers. The machine can wrap bales with a diameter of 1200-1500 mm. The maximum weight of the wrapped bale must not exceed 1000 kg. It takes about two minutes to wrap a bale with a diameter of 1200 mm. The compact dimensions of the machines allow for easy movement in the field or on the farm. Due to the relatively low weight of the bale wrapper (780 kg), it can be transported and operated with a tractor with a power of only 60 kW. The standard equipment includes a 750 mm film feeder, a hydraulically driven film cutter and the control panel. As an option, the machine can be equipped with a hydraulic bale placer, which allows the wrapped bale to be placed on its base.


ATTENTION !!!!! MUST READ !!!!!

We expressly reserve the right to prior sale, as we also offer this item on other portals.
We strongly recommend a viewing and inspection so that the buyer has no misconceptions about the condition and suitability. Viewings and inspections are possible at any time by appointment and are expressly desired !!!
Illustrations similar, may contain accessories subject to a surcharge.
The interior dimensions given are approximate.
TRADE-IN POSSIBLE FOR ALMOST EVERYTHING !!!
TRADE-INS AND TRADE-INS POSSIBLE !!!
Showroom: 58285 Gevelsberg , Am Sinnerhoop 17
Opening hours: Monday ? Friday 8.30 to 17.00, Saturday 8.30 to 14.00
always over 500 new and used trailers in stock !!!

Pegasus Trailer GmbH
Am Sinnerhoop 17
58285 Gevelsberg
Tel.: Fax:

De advertentie werd automatisch vertaald. Vertaalfouten zijn mogelijk.