Dieplader oplegger

NOOTEBOOM OSDS-Semi-Tieflader

Fifth wheel height: 1200-1250 mm
Gooseneck cross-section: 185 mm
Gooseneck length: 3800 mm
Front overhang: 1200 mm
Front radius: 1560 mm
Free turning radius under gooseneck: 2350 mm
Gooseneck slope: 750 mm x 14°
Gooseneck width: 2520 mm

Loading area
Ride height when loaded (-/+ lift): 860 mm -70/+130 mm
Step to gooseneck: 550 mm
Loading area length: 9250 mm
Loading area slope: 1150 mm x 5°
Loading area width: 2520 mm
Loading area widening up to max: 3020 mm

Axle spacing
Kingpin first axle: 7190 mm
Rear wheelbase: 1360 mm
Rear overhang: 2340 mm
Rear kingpin: 12250 mm

Load-up ramps
Ramp angle: 4000 mm x 11°
Height in driving position: 3265 mm
Width when folded over ramps: 1770 mm
Width when extended over ramps: 2990 mm
Ramp width: 880 mm

Power supply
- Connections for brakes, lighting, and EBS centrally located on the front console.
- NATO connection cable in spiral flex design (coil cable).
- NATO socket. Mounting kit for tractor unit is not included.

Front bulkhead / box
- Lockable steel toolbox mounted on the front gooseneck, divided into three compartments, with side doors and a stainless steel lid on top. Color: silver gray RAL 9006. SUITABLE FOR INSTALLATION OF A WINCH.

Gooseneck Options
- Spare wheel carrier mounted on the front.
- A lashing eye on the back of the gooseneck for attaching the steel cable.
- 3 aluminum side walls on the gooseneck, 400mm high, all three approximately 2.3m long.

Loading Area
- The loading area is sloped at 1150x100mm (5°).
- Tubular central frame with practical cross members. This makes the semi-trailer very torsion-resistant and therefore very stable when loaded.
- The cross members are reinforced where necessary to ensure safe passage of machinery.
- 6/8mm teardrop plate above the axles.
- Cross members recessed by 4cm.
- Cross members recessed by 4cm in the slope.
- Loading area above the tires reinforced for road milling machines up to Wirtgen 1000DC.
- Extendable extension brackets every approximately 1.40 m to widen the loading area by 250 mm per side.

Brakes
- 2-line Wabco EBS braking system, with automatic load-sensing brake force control (ALB), anti-lock braking system (ABS), and roll-over stability support (RSS).
- Parking brake via spring cylinders on multiple axles.
- ISO couplings for connecting the brakes.
- A Duomatic connection is mounted parallel to the ISO air connections.

Nljlhcdwsicfare Isa
Lighting
- Wiring is based on Hella EasyCon and complies with the IP69 insulation standard, suitable for ADR.
- 2 7-pin sockets (ISO-N and ISO-S) on the front bracket.
- White/red clearance lights, orange side lamps, and license plate lighting in LED design.
- Rectangular LED taillights. (According to EU directives, the truck must be capable of monitoring the trailer's (LED) direction indicators.)
- 1 complete rear rotating light connection.
- Preparation for warning signs on the gooseneck and axle frame, consisting of holders and sockets.
- 4 adjustable red/white warning signs with protected LED position lights.
- Rotating light connections on the warning signs.
- Pair of additional holders for mounting warning signs in the existing stake pockets on top of the loading area.
- LED rotating light (10W - 24V/0.4A - 12V/0.8A)
- Additional 2-pin socket mounted on the left ramp.
- Additional 2-pin socket mounted on the right ramp.
- 2 LED work lights on the

De advertentie werd automatisch vertaald. Vertaalfouten zijn mogelijk.