Koffer

WIELTON 3-Achs Koffer Dry Master

Wielton 3-axle box semi-trailer
Dry Master type: NF3DS

Technical data
Overall length 13,900 mm
Internal length 13,620 mm
Overall width 2,550 mm
Internal width 2,480 mm
External height 4,000 mm
Interior height 2,700 mm
Rear through-loading height 2,645 mm
Track width 2,040 mm
Wheelbase 1,310 mm
Coupling height 1,145 mm
Wheelbase 7,800 mm
Tires 385/65R22.5
Total weight 30,000 kg
Total weight tech. Perm. 30,000 kg
Saddle load 12,000 kg
Axle load 3 x 8,000 kg
Technical axle load 3 x 9,000 kg
Unladen weight 6,500 kg
Euro pallets 33
Volume 92.8 cbm

Chassis / frame
Frame welded as a double side member with cross members and outer frame
Welded construction made of high-quality S700 steel in weight-optimized design
Lashing rings 19 pairs
Working area according to ISO1726:2003
Elimination of e-wheel holder

Axles and chassis
3 axles with a load capacity of 9,000 kg each
SAF axles with air suspension and disc brakes (ET120)
Brake disks with a diameter of 430 mm
1st axle as lift axle
Saddle plate with 2? kingpin (corner dimension 2040 mm), in accordance with SAE standard, replaceable
2 mechanical landing legs, Jost or SAF make
Single-sided landing gear operation, right

Chassis accessories
2 plastic wheel chocks with holder
1 rear ladder, extendable with large step surface, in accordance with UVV
Large roller bumpers, at the rear of the rear frame
Side collision protection according to ECE
1 large PVC toolbox, 165 l, behind power unit
Rear underride guard made of steel in accordance with ECE
PVC mudguards as ? shell with anti-spray protection system
Elimination of e-wheel holder

Brake system
Brake system according to ECE directive
Dual-circuit air brake system, Wabco, ADR-compliant
EBS system, System 2S/2M, 2 sensors on one axle, with RSS
Lifting and lowering device
Brake line connections at the front in front of the bulkhead
Standard air connections to ISO
Air reservoir for brake system and air supply made of steel

Lighting and electrics
Rear light carrier made of steel
24V lighting system in accordance with ECE R48
Hella multi-chamber multifunction rear lights
LED license plate lighting
2 LED clearance lights
LED side marker lights
3 LED ceiling lights inside
2 x 7-pin and 1 x 15-pin socket, front and EBS socket (without connection cables) to ISO

Wheels and tires
6 x 385/65 R 22.5 tires
6 x steel rims (11.75x22.5) ET 120
Protective caps for wheel nuts

Floor
Screen printing plate floor (30 mm thick, glued several times, non-slip and waterproof, sealed at cut edges)
Floor grouting all round, complete
Floor end plate, 270 mm deep across the entire width of the vehicle, in the rear area
Forklift accessible up to 7500 kg forklift axle load

Body
Side walls made of 20 mm plywood panel
Roof made of 25 mm isothermal panel
Front wall made of Plywood panel 21 mm, additional plywood 6 mm up to 1400 mm high
End wall and side walls bolted to the chassis frame and connected via corner posts
1 row on both sides, load securing rails at a height of 1200 mm
Side collision protection, 260 mm high
Rear wall as aluminum double-wing door with 2 internal espagnolette locks each

Paintwork / color specifications
All steel elements shot-blasted twice before painting
KTL surface coating as primer for optimum corrosion protection
E2Ovlxa
Dust-free painting of the top coat by robot
Frame: RAL 7021 black-grey
Seat posts: black powder-coated
Axles: black
Rims: silver
Wheel hubs: black
Side bumpers: white
Rear light carrier: white
Underride guard: white
Body (front wall/side wal

De advertentie werd automatisch vertaald. Vertaalfouten zijn mogelijk.